If you will be adding stamps and messaging after printing, we would suggest a one-sided UV coating as this keeps the art or graphics side intact, while allowing for stamps and personalizing on the non-UV coated side.Keep important design elements outside this space, as it may be covered by the barcode. Leave a space 3/4″ x 4-7/8” in the lower right-hand corner to allow for it. If the barcode is not included in the address block, it will be placed across the bottom of the postcard, toward the right side corner.The Intelligent Mail barcode is approximately 3” x 5/8” and can be included in the address block if there is at least 3-1/2” of horizontal space available in the address area.This allows for easier scanning by machines and reading by postal workers. There should be no more than 7% of ink coverage in the addressing and barcode areas.If a return address is included, it should be located 1/4” from the top left side of the postcard. ![]() This area is 1/2” from the left and right edge of the card, 3/4” from the bottom and is 2-1/8” tall. The address can be placed anywhere within a specific space on the postcard.Leave a 1” x 1” space in the upper right-hand corner of the front side design for the postcard’s postage or indicia.It may get trimmed off during the printing process. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |